Default display during therapy
Key
1 Active ventilation mode
The active ventilation mode is displayed at this
point in the status line.
2 Status line
This is where device status information (such as
alarm state display, filter change or servicing due)
is displayed.
3 Alarm display
If an alarm has been muted, it is then shown in
the status line for 120 seconds.
4 Active program
Indicates the ventilation program currently active.
5 Battery charge status of internal
battery
Displays the charge status of the internal battery.
When the battery is charging, the segments are
shown consecutively.
6 Battery charge status of replaceable
battery (optional)
Displays the charge status of the replaceable battery
available as an option. If the battery is being
charged, the segments are shown in succession.
7 Memory card symbol
Appears if a memory card is present and there is
data saved on the memory card.
8 Respiratory phase change display
Indicates whether the current respiratory phase
change is spontaneous or mandatory
(spontaneous: S, mandatory: T); the display
changes from left (inspiration) to right
(exhalation) depending on respiratory phase;
mandatory exhalation is shown here.
Also indicates whether the trigger for inspiration
is blocked due to an activated trigger lockout time
at the start of expiration ( ).
To Next Page
Loading...
Need help?
General
