Rotary indexing ring NR
Packaging
5 Packaging
5.1 Types of packaging
Packaging in Europe
The product is factory-treated with anti-corrosion agent,
packaged in film and screwed onto a palette.
Packaging for air and sea freight
The product is factory-treated with anti-corrosion agent,
packaged in Corpac-coex-VCI film, screwed onto a palette,
and then packed into a wooden box with foam plastic mate-
rial.
5.2 Unpacking the product
1. Do not remove the packaging until immediately prior to mounting.
2. Dispose of the packaging material in compliance with all directives, standards, and safety
regulations applicable at the installation site.
5.3 Verification of the delivery
■
Check the delivery for completeness and transportation damage upon reception.
■
In the case of damage, reject the delivery or accept it only conditionally.
■
Document the damage in the transportation documents/bill of delivery (any damage detected must
be immediately reported to the forwarding agent and confirmed by the forwarding agent).
■
Take photographs of the damage.
■
Report the damage to WEISS GmbH.
24 / 62
Mounting instructions_062019_1.0_en
To Next Page
Loading...
Need help?
General
