EasyManuals Logo

WEISS NR Series User Manual

WEISS NR Series
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Rotary indexing ring NR
Transportation
6.2 Load lifting and handling equipment
Use properly rated load lifting and handling
equipment and hoisting belts/hoisting equipment
for transporting the product.
Eyebolts must not be used as load lifting and
handling equipment.
6.3 Fastening the load lifting and handling equipment
WARNING
FALLING, TOPPLING, OR LOWERING LOADS
Insufficiently rated load lifting and handling equipment may break. Transportation
vehicles, lifting gear, chains, belts, and other equipment not rated for the product
may fail or tilt.
Failure to follow these instructions can result in death, serious injury, and
equipment damage.
Only use transportation vehicles, lifting gear, chains, belts, and other lifting and
handling equipment that comply with all applicable regulations and that are rated
for the weight of the product including packaging.
Verify that there are no persons in the danger zone.
Verify that the product is properly secured against falling and toppling.
Observe the maximum engagement thread for the load lifting and handling equipment, see chapter 4.5.
1. Remove the screw connections between the
product and the transportation feet [1] before
lifting the product.
26 / 62
Mounting instructions_062019_1.0_en

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the WEISS NR Series and is the answer not in the manual?

WEISS NR Series Specifications

General IconGeneral
BrandWEISS
ModelNR Series
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals