Rotary indexing ring NR
Operation
12 Operation
12.1 Basic information on operation
WARNING
UNINTENDED EQUIPMENT OPERATION
Incorrect or unsuitable parameter values or settings can cause unintended
movements, trigger signals, and compromise functional safety.
Failure to follow these instructions can result in death, serious injury, and
equipment damage.
■
Verify that parameter values and settings can only be modified by authorized
personnel who fully understand each and every effect of such a modification.
■
Verify that all parameter values and settings are correct by performing a test run.
WARNING
UNANTICIPATED MOVEMENT OF THE ROTARY RING
Even when the motor is at a standstill, the rotary ring can move.
Failure to follow these instructions can result in death, serious injury, and
equipment damage.
■
Block or safeguard the rotary ring in such a way that a movement of the rotary
ring is safely prevented before starting work on the rotary ring.
WARNING
ELECTROMAGNETIC RADIATION
Failure to follow these instructions can result in death, serious injury, and
equipment damage.
■
Verify compliance with all international, national, and local directives, standards,
and safety regulations, including all regulations concerning workplace safety and
prevention of accidents, with regard to electromagnetic radiation.
■
Take all necessary measures to ensure that persons with active medical implants
(such as heart pacemakers or insulin pumps), metal implants, and magnetically
or electrically conductive objects are not exposed to the electromagnetic fields
generated by the motor.
The product is a partly complete machine pursuant to Directive 2006/42/EU and intended to be
incorporated into or assembled with other machinery. The information required for operation results
from the functionality of the machine or system into which the product is incorporated and from the
application implemented with it.
The instructions for the safe operation of the final machine or system must be provided by the system
integrator (the person who incorporates the product in a machine pursuant to Directive 2006/42/EU)
and/or the operator in the form of a manual with operating instructions, see chapter 2.3.
These operating instructions must be a complete manual which describes all work on and with
the product and which contains all information relevant to the product. The system integrator and/
or operator must ensure compliance of the operating instructions with all applicable directives,
regulations, and standards.
Mounting instructions_062019_1.0_en
43 / 62
To Next Page
Loading...
Need help?
General
