Rotary indexing ring NR
Safety
2 Safety
2.1 Safety messages and hazard categories
These mounting instructions contain safety messages to alert you to potential hazards and risks.
Safety messages in these mounting instructions are highlighted with warning symbols and warning
words.
The signal word describes the source of the hazard. The text contains instructions on how to avoid the
hazard as well as the consequence resulting from failure to follow the instructions given in the safety
message.
Depending on the severity of a hazard, the safety messages are classified according to different
hazard categories.
DANGER
DANGER indicates an immediately hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a hazardous situation, which, if not avoided, can result in death
or serious injury or equipment damage.
CAUTION
CAUTION indicates a hazardous situation, which, if not avoided, can result in injury
or equipment damage.
NOTICE
NOTICE indicates a hazardous situation, which, if not avoided, can result in
equipment damage.
In addition to the instructions and safety messages provided in these mounting instructions, you must
comply with all directives, standards, and safety regulations applicable at the installation site of the
product.
2.2 Hazard symbols
The following symbols are used in these mounting instructions:
This is the general safety alert symbol. It alerts to injury hazards or equipment damage.
Comply with all safety instructions in conjunction with this symbol to help avoid possible
death, injury, or equipment damage.
This symbol alerts to hazardous electrical voltage. If this symbol is used in a safety mes-
sage, there is a hazard of electric shock.
8 / 62
Mounting instructions_062019_1.0_en
To Next Page
Loading...
Need help?
General
