To Next Page

To Previous Page

Rotary indexing ring NR

Electrical connection

The following components must be connected for the motor:

■

Lockable main switch

■

Suitable Emergency Stop equipment (as per IEC 60204-1 / EN ISO 13850)

■

Motor contactor (refer to documentation of the manufacturer for additional information; see

applicable documents)

■

Brake contactor (refer to documentation of the manufacturer for additional information; see

applicable documents)

Mounting instructions_062019_1.0_en

39 / 62

Default Chapter2
- Table of Contents2
1 Introduction5
- About These Mounting Instructions5
- Intended Use5
- Predictable Incorrect Application6
- Applicable Documents6
- Warranty7
2 Safety8
- Safety Messages and Hazard Categories8
- Hazard Symbols8
- Responsibilities of the System Integrator And/Or Operator9
- Qualification of Personnel9
3 Product Description10
- Overview10
- Function Description13
- Nameplate14
- Type Code14
- Mounting Positions15
- Drive Positions15
- Passage of Media16
4 Technical Data17
- General17
- Motor17
- Climatic Environmental Conditions "Operation18
- Climatic Environmental Conditions "Transportation and Storage18
- Dimensions19
- Load Data23
5 Packaging24
- Types of Packaging24
- Unpacking the Product24
- Verification of the Delivery24
6 Transportation25
- Transporting the Product25
- Load Lifting and Handling Equipment26
- Fastening the Load Lifting and Handling Equipment26
7 Storage28
- Storing the Product28
8 Mounting29
- Prerequisites for Mounting29
- Equipment and Tools29
- Tightening Torques and Property Classes30
- Bolting down the Product30
- Displacing the Drive Housing32
- Mounting Additional Components34
- Mounting Safety Equipment37
9 Electrical Connection38
10 Controller40
- Basic Information on Control40
- WEISS Gmbh Controller/Software Package (Optional)40
11 Commissioning41
- Prerequisites for Commissioning41
- Performing Commissioning41
12 Operation43
- Basic Information on Operation43
13 Troubleshooting44
- Issue, Cause and Remedy44
14 Cleaning46
- Performing Cleaning46
15 Maintenance48
- Maintenance Plan48
- Lubricant48
- Replacing the Motor48
- Inspecting the Toothed Belt53
- Replacing the Toothed Belt55
16 Decommissioning59
- Decommissioning the Product59
17 Dismounting59
- Dismounting the Product59
18 Disposal59
- Disposing of the Product59
19 Service and Spare Parts60

Brand	WEISS
Model	NR Series
Category	Industrial Equipment
Language	English

WEISS NR Series User Manual

Table of Contents

Questions and Answers:

WEISS NR Series Specifications

Related product manuals