High Torque Rotary Unit • ST0055 - ST0140 • R04-2014
25/42
Transport
4.1 Transport damage
4
4 Transport
4.1 Transport damage
The delivery should be inspected for damage immediately after it is received. The con-
tents of the delivery should be checked for damage if damage to the packaging is detec-
ted which could indicate damage to the contents. Details of the scope of delivery are
provided in Chapter 3.3.1.
Detected damage should be immediately reported to the transportion company and con-
firmed.
4.2 Intermediate storage
Observe the storage conditions listed in the following table, if intermediate storage is
planned for a longer period of time.
NOTICE
The machine must be protected against impermissible strains (mechanical strain,
temperature, humidity, aggressive atmospheres) during transport and when being
stored.
Climatic
zone
Packaging Storage location Storage duration
All Packed in contai-
ners
With moisture
absorbers and
humidity indicator
sealed in film
Protect against
insect damage and
mould formation by
treating chemically
Roofed over
Protected against rain
Not exposed to vibrations
Max. 3 years with
regular inspection of
packaging
Open
Roofed over and sealed at a
constant temperature and air
humidity (5 °C < T < 60 °C,
50% relative humidity)
No sudden temperature fluc-
tuation and controlled ventila-
tion with filter (free of dirt and
dust)
No aggressive vapours and no
vibrations
Protected against insect
damage
2 years and longer
with regular inspec-
tion. Check for cle-
anliness and
machine damage
during inspection.
Check that anticor-
rosion protection is
unspoiled.
To Next Page
Loading...
Need help?
General
