WEISS ST Series - Warranty and Liability Information

High Torque Rotary Unit • ST0055 - ST0140 • R04-2014
7/42
Introduction
1.6 Further applicable documents
1
1.5.2 Legend
Symbols and abbreviations with the following meaning are used in this manual to make
its content more clear:
1. Indicates a numbered list.
a) Indicates the second level of a numbered list.
• Indicates a list.
` Indicates the second level of a list.
 The book symbol before a section of text indicates further applicable documents.
L The information symbol before a section of text indicates an additional note or an
important tip for use.
1.5.3 Figures
The figures shown are examples. There may be differences between the illustrations and
the actual delivery.
1.5.4 Directory of valid pages
Pages of this manual including the title page: 42
1.6 Further applicable documents
In addition to this manual, further documents are required to ensure safe operation of this
machine. The specifications stated in these documents must to be observed.
For control system by WEISS-GmbH:
• Operating manual WAS.indexer Control ST0055 - ST0140
• Operating manual WAS.handling Windows programme
1.7 Warranty and liability
The machine is covered by a guarantee of 24 months from the date of delivery without
shift limitations.