High Torque Rotary Unit • ST0055 - ST0140 • R04-2014
33/42
Maintenance
9.2 Maintenance work
9
9.2 Maintenance work
Maintenance includes tasks for the purpose of:
• Inspection
• Maintenance
• Repair
9.3 Inspections
9.3.1 Conducting a six-monthly visual inspection
Conduct a visual inspection for
` loose bolt or pin connections.
` damaged to cables and plugs.
9.4 Maintenance
The machine is maintenance free.
9.5 Repair
The operator should not perform any maintenance or repair work on the machine.
Should maintenance or repair work become necessary, the customer service of WEISS
GmbH is to be contacted.
To Next Page
Loading...
Need help?
General
