High Torque Rotary Unit • ST0055 - ST0140 • R04-2014
9/42
Safety
2.2 Safety equipment for the machine
2
2.1.2 Requirements to be met by personnel
It is imperative that the following safety instructions be observed during all operations
involving the machine. This ensures avoidance of life-threatening injuries, machine
damage, other material damage and environmental damage.
The personnel must ensure that
• trainees are initially permitted to only work on the machine under the supervision of an
experienced person.
• all personnel who maintain the machine read the operating manual and confirm with
their signature that they have understood the operating manual.
• unauthorised persons are not in the vicinity of the machine when tasks are being per-
formed.
• supplemental to the operating manual the operating instructions as specified in labour
protection legislation and work equipment use legislation are complied with.
• the operator or supervisory personnel are informed in the event of malfunction.
• required personal protective clothing is used.
The following work described in this operating manual should only be realised by quali-
fied personnel:
• Transport
• Installation
• Commissioning
• Maintenance
2.2 Safety equipment for the machine
The operating company is responsible for ensuring that a suitable safety concept is
developed and applied for the safe operation of the machine.
The operating company must take all measures to protect his personnel against injury by
the machine.
These include:
• Safety housing with monitored safety door
• Emergency-stop circuit
• Light barriers or switch mats
• Warning signs
To Next Page
Loading...
