High Torque Rotary Unit • ST0055 - ST0140 • R04-2014
6/42
Introduction
1.5 Assembly and instructions manual
1
1.5 Assembly and instructions manual
In the following text of the document, the Assembly and instruction manual will be
referred to as manual.
We reserve the right to undertake modifications because of technical developments to
the data and illustrations contained in these instructions.
The operating manual and the associated valid documentation are not subject to an auto-
matic revision service.
Information on the respective current edition can be obtained from the manufacturer.
Local regulations must be observed.
This manual describes handling of the assembly and contains important instructions and
information to assist you in using the assembly.
This manual is intended for trained technical personnel or persons who have been
instructed.
Safety instructions in individual chapters should be observed.
1.5.1 Explanation of safety instructions in this manual
This manual contains instructions that you should observe for your personal safety and to
avoid material damage.
Safety instructions for your personal safety are highlighted by a sign containing a warning
triangle and signal word. The associated text describes the hazard involved, avoidance
options and the consequences which may result from failure to observe the safety
instruction.
General instructions or instructions relating to possible material damage are highlighted
by a sign without a warning triangle.
They are, depending on the degree of risk involved, illustrated as follows:
DANGER
A warning triangle with the signal word DANGER
indicates an immediate hazardous situation, which, if
not avoided, will lead to fatalities or severe injuries.
WARNING
A warning triangle with the signal word WARNING
indicates a potential hazardous situation, which, if not
avoided, can lead to fatalities or severe injuries.
CAUTION
A warning triangle with the signal word CAUTION
indicates a potential hazardous situation, which, if not
avoided, can lead to light or medium injuries.
NOTICE
A sign with the signal word NOTICE indicates
potential material damage or provides additional
information, which should be observed when
operating the machine.
To Next Page
Loading...
Need help?
General
