High Torque Rotary Unit • ST0055 - ST0140 • R04-2014
30/42
Operation
7.1 Safety during operation
7
7 Operation
7.1 Safety during operation
7.2 Operating the machine
The machine is designed for integration into other machines, into other incomplete
machines or equipment or for connection to them.
Safe operation and control are the responsibility of the operator.
7.3 Operating personnel workstations
The operating personnel workstations are determined by the operator of the plant or pro-
duct in which the machine is integrated.
WARNING
Risk of injury due to incorrect alteration of operating parameters.
Improper changes of operating parameters can cause unforeseeable system behaviour.
Operating parameters should only be changed by authorised personnel. Altered opera-
ting parameters should be checked in a test. Incorrect parameters can cause consequen-
tial damage and thus injuries.
To Next Page
Loading...
Need help?
General
