Welch Allyn CP 150 - Device Settings Configuration; Basic and Advanced Device Settings

Settings
View or change the device information
To view or change the device information
1. Touch the Settings tab. The ECG tab appears.
2. Touch the Device tab.
Modify the settings as desired:
•
LCD brightness
• Date
• Time
• Adjust clock for daylight saving time
Touch Power down to turn off the device.
Advanced settings
The Advanced tab provides password-protected access to the CP150's Advanced
settings (or Admin mode), enabling administrators, biomedical engineers, and/or service
engineers to configure specific features. The Advanced tab also presents read-only
information about the CP150.
Access Advanced settings
Note You cannot access Advanced settings if a patient test is in progress.
1. From the Home screen, touch the Settings tab.
2. Touch the Advanced tab.
3. Enter 6345 as the access code and touch OK.
The General tab appears at the bottom of the screen and the Regional tab appears at
the top of the screen.
4. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home screen, touch Exit.
The Home screen appears.
27