Disassembly, repair, and reassembly
These procedures provide instructions for system disassembly and board removal.
Except where otherwise noted, the assembly procedure is the reverse of the
disassembly procedure.
Each procedure may include the following:
• Reassembly notes: This contains information specific to reassembly not addressed
in the disassembly instructions.
WARNING Electrical shock hazard. Disconnect power before opening the
device.
CAUTION Before disassembling the device, disconnect the AC power
cord and any attached accessories.
CAUTION Perform all repair procedures at a static-protected station.
CAUTION When the system case is opened, regard all parts as extremely
fragile. Execute all procedure steps with care and precision.
CAUTION Observe screw torque specifications, especially with screws
that secure directly into plastic standoffs.
CAUTION To avoid mismatching screws and holes, keep the screws for
each piece with that piece as you remove modules and circuit assemblies.
71
To Next Page
Loading...
