Guidance and manufacturer’s declarations
EMC compliance
Special precautions concerning electromagnetic compatibility (EMC) must be taken for all
medical electrical equipment. This device complies with IEC EN 60601-1-2:2015.
• All medical electrical equipment must be installed and put into service in accordance
with the EMC information provided in this document and the Welch Allyn CP150
Electrocardiograph Directions for Use.
• Portable and mobile RF communications equipment can affect the behavior of
medical electrical equipment.
The Welch Allyn CP150 Electrocardiograph complies with all applicable and required
standards for electromagnetic interference.
•
It does not normally affect nearby equipment and devices.
• It is not normally affected by nearby equipment and devices.
• It is not safe to operate the electrocardiograph in the presence of high-frequency
surgical equipment.
• However, it is good practice to avoid using the electrocardiograph in extremely close
proximity to other equipment.
Emissions and immunity information
For information about electromagnetic compatibility (EMC), see the Welch Allyn CP 150
12-lead resting electrocardiograph Directions for Use
69
To Next Page
Loading...
