Welch Allyn CP 150 - Tools and Disassembly Overview

CP 150 Disassembly Flow chart
Required tools and equipment
• #1 Phillips bit
• #2 Phillips bit
• #10 Torx bit
• 3/16" Hex Socket
• 1/4" Hex Socket
• Torque driver calibrated for 3.5 in-lb ±0.5 in-lb
• Torque driver calibrated for 4.0 in-lb ±0.5 in-lb
• Torque driver calibrated for 5.0 in-lb ±0.5 in-lb
• Tie-wrap cutter
72 Disassembly, repair, and reassembly CP 150 12-lead resting electrocardiograph