1. Download the Welch Allyn Service Tool and Partner Connect and install on your PC.
2. Plug your CP 150 device into a USB port on your PC running the Welch Allyn Service
Tool and turn on the device.
3. If the Welch Allyn Service Tool is not still open, go to the Windows Start menu, and
then select All Programs > Welch Allyn > Welch Allyn Service Tool.
4. Click Add new features.
5. Enter the DICOM code into the authorization code field.
6. Click Activate.
At the Install License screen, click OK.
42 Service CP 150 12-lead resting electrocardiograph
To Next Page
Loading...
