CMP100 User Guide
10
tamper with or remove the grounding pin. This could cause damage to OMP150,
personnel, or property.
• Plug the female end of the power cords into the front of the unit.
• Locate a protected outlet to plug into the male ends of the power cables.
When you take the equipment from a cold condition into a much warmer and
humid condition, the equipment should be acclimated to the warm and humidity
condition for at least 30 minutes. Powering up a non-acclimated unit may lead to
shortcut or other damage to electronic components.
A professional UPS system is recommended for better performance of your
content distribution system.
To Next Page
Loading...
