Switch digital relay on or o
Another important SMS command is to switch the digital relay on or o via SMS.
The following SMS commands can be used for this
• io output 1 on ‑ switches on the relay
• io output 1 o ‑ switches the relay o
3.3.5 3.3.5. GPS (TK8x5L‑EGW bzw. TK8x5L‑EDW)
3.3.5.1. Position
Under Services > GPS > Position you will see the data about the current position if the corresponding antenna is
connected to the router.
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00
Page 67
To Next Page
Loading...
