7.10. Language
The menu language can be changed in the menu item “Language”. The user is automatically prompted for his
desired language at initial operation and after each reset.
Note: The menu item is only visible if Expert Menu “On” has been set.
Language Set menu language
Deutsch
English
Francais
Espanol
Italiano
3 Back
7 Run
The menu appears in the selected language immediately after selection.
7.11. Info
Note: The menu item is only visible if Expert Menu “On” has been set.
The following information about the Sensor is displayed in the menu item “Info”.
Info
Order number
Software version
Serial number
3 Back
7 Run
7.12. Reset
The Sensor setting can be reset to the delivery state in the menu item “Reset”.
The settings in the delivery state can be found in chapter “6.2. Default Settings” on page 9.
Note: The menu item is only visible if Expert Menu “On” has been set.
Reset Set back to the delivery state
Press <R> for Reset The Sensor settings that have been made can be reset to the delivery state by
pressing the “R” key.
To Next Page
Loading...
