Westerbeke 3.5 SBCG - Engine Components; Spark Plugs

ENGINE COMPONENT:s
SPARK PLUGS
The spark:. plugs should be cleaned andre-gapped after the
first 50 hour break-in period, then inspected every 250 hours
thereafter and replaced as needed. .
A WARNING: Do not remove the spark plugs while
the engine is hot. Allow the engine to cool before
IIIIIIOVing them.
$.PARI( ~LIIQ QM: ~·-~ .,. q.tpfiin.JJJ,;B " ~-~.~.in),
8PA.RJ( P~U~ TQfl~q~; 11-l61b.,ft·(1~ ~ 2!i N~q).
t~Qll: 4Jct!te Arm~Se~ app#¢ to (he thre04¢ prmia~ of
the spo;r~ plr,tg~,.wiU ~tard carrosir:m. making fit.~ ~r.r~pval
oftbe Spark plugs e~ie~ . - .
t .
GAP~'-
,
INSPECT-FOR
WEAR&. CARBON
: IBSPECu,IG
THE SPARK
PLUGS
Warranty Void
If label is damaged or
cover
is removed.
No Serviceable Parts
Inside.
ECU
· (ELECTRONIC CONTROL UNIT)
(INSIDE CONTROL BOX)
-CAM SENSOR
LOCATED ON TOP OF THE
FLYWHEEL HOUSING
AIR SCREEN
THE AIR SCREEN SHOULD BE
CLEANED AFTER THE FIRST 50
HOURS OF OPERATING~ AND EACH
100 HOURS FROM THEN ON. CLEAN
WITH A WA1FR SOLUBLE CLEANER
SUCH AS GUNK.
To Adjust: Remove the sensor- and rotate the engine observing
through the opening for a raised round disc. Position this under
.the opening. Thread the sensor in until it touches the disc, then
back it out ~ - Y2 tum and lock it in position.
·-,"'·
--
-~
-...
CONTROL PANEL
.FAULT LEOS
.START/STOP
ROCKER SWITCH
,,2DA CIRCUIT
'BREAKER
MAIN CIRCUIT
BREAKER
Engines & Generators .
20