Wheelock SAFEPATH SCSP-15SP User Manual

2-4
Section 2-7 - Operation Modes
The SAFEPATH
®
Panel has two operation modes:
1. Standby
2. Alarm
Standby Mode
Standby is the normal mode. The SAFEPATH
®
Panel supervises the connections and internal
components to maintain proper operation. All strobes and speaker appliances are off.
Alarm Mode
Alarm mode occurs when an emergency signal is initiated manually, or by the FACP or control
equipment.
Section 2-8 – Glossary of Terms
AHJ – Authority Having Jurisdiction
EOLR – End of Line Resistor
FACP – Fire Alarm Control Panel
NAC – Notification Appliance Circuit
NEC – National Electric Code (NFPA-70)
NFPA – National Fire Protection Association
PTT – Push to Talk (Microphone)
PCB - Printed Circuit Board
UL - Underwriters Laboratory

Wheelock SAFEPATH SCSP-15SP Specifications

General

Brand	Wheelock
Model	SAFEPATH SCSP-15SP
Category	Security System
Language	English