ix
LIST OF TABLES
Table 3-1 SCMB DIP Switch Setting Description……………………………………………… 3-17
Table 3-2 DIP Switch Settings for Available Tone Sounds…………………………………… 3-17
Table 3-3 Standby Current for Single Circuit SAFEPATH
®
Panel………………………….. 3-20
Table 3-4 Standby and Alarm Current for Single Circuit SAFEPATH
®
Modules………….. 3-21
Table 3-5 Standby Current for Single Circuit SAFEPATH
®
Amplifier Modules……………. 3-21
Table 3-6 Calculations for Amplifier Alarm Current………………………………..…………. 3-22
Table 3-7 Average Current Output Measured by Wheelock, Inc……………….…………… 3-22
Table 4-1 Alarm Conditions and Results……………………………………………………….. 4-3
Table 6-1 Miscellaneous Hardware Tests………………………………………..……………. 6-1
Table 7-1 Module Trouble Procedure Cross Reference……………………………………… 7-3
Table 7-2 MDX-2 Trouble Procedure Cross Reference………………………………………. 7-3
Table 8-1 Outputs…………………………………………………………………………………. 8-2
To Next Page
Loading...
Need help?
General
