3-22
REMOVING THE OVEN DOOR HANDLE & GLASS
1. Remove the oven door from the range
(see page 3-20 for the procedure).
2. Place the oven door on a padded work
surface with the front glass facing down.
3. Remove the two top door liner screws.
Top Liner Screws
4. Remove the three bottom screws from the
door liner.
5. Lift the liner assembly off the front glass
and set it aside.
6. To remove the door handle, unhook it
from the top of the front glass and remove
the two door handle screws.
Bottom Liner Screws
7. To remove the front door glass, remove
the two side trim screws. Be careful not to
break the trim near the mounting screw.
Door Handle Screws
Door Glass Trim Screws
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
WARNING
CAUTION: When you work on the electric
range, be careful when handling the sheet
metal parts. Sharp edges may be present, and
you can cut yourself if you are not careful.
To Next Page
Loading...
