3-24
REMOVING THE OVEN DOOR GASKET
1. Open the oven door to its fully down posi-
tion.
2. Pull the oven door gasket clips out of the
liner holes until all of the clips are re-
moved.
REASSEMBLY NOTE: When you install the
new gasket, make sure that all of the clips are
seated in their liner holes, and that the ends of
the gasket are pushed fully into their holes. Use
the pointed end of a pencil to push the gasket
ends into the holes.
3. Pull the ends of the gasket out of the liner
holes.
End Of Gasket
In Liner Hole
Push End Of
Gasket Into
Hole With
Pencil
Door Gasket
Gasket Clips
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
WARNING
CAUTION: When you work on the electric
range, be careful when handling the sheet
metal parts. Sharp edges may be present, and
you can cut yourself if you are not careful.
To Next Page
