PROCEDURE
1 Cut out the defective cylinder from the injection, refer to section 10.8 Temporary cut out
a defective injection valve.
2 Disconnect the electrical connection to the related exhaust valve control unit (VCU).
3 Repair the fault as soon as possible, refer to the Maintenance Manual.
CLOSE UP
• The engine can be started and operated at decreased load, refer to section 8.3 Start the
engine - general
X35-B
AA00-0000-00AAA-662D-A
Operation Manual Temporary cut out a defective exhaust valve drive
Winterthur Gas & Diesel Ltd.
- 405 - Issue 001 2019-10
To Next Page
Loading...
