Winkhaus blueMatic EAV - Page 129

EN
8
Accessories
7
Technical
specications
6
Errors
Troubleshooting
5
Maintenance
and care
4
Operation
Programming
3
Installation
2
Product
description
1
Important
information
General
information
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen www.winkhaus.de
Subject to technical changes
Print-no. 504 474 4
01/2017
Installation, Operating and Maintenance
Instructions blueMatic EAV
59
Error Indication Possible cause Troubleshooting
Power failure when/
during:
a) the door is locked • the door can be operated
mechanically (prole
cylinder/handle)
b) the door is open,
lock is unlocked
the door is possibly
not held by the latch
• the motor is not in
starting position
• close the door by pre-
locking the main bolt, if
necessary
c) the unlocking
procedure
when the door
is locked again,
possibly the hook,
main bolt do not lock
completely
• the motor is not in
starting position
•
door can be operated me-
chanically (prole cylinder/
ha
ndle), if motor has retur-
ned to starting position Ü
c
o
mpletely functions
EAV does not operate
with remote but LED
is illuminating.
Door doesn‘t open • Remote battery dead
• Out of range to the
remote control
• Remote control not
autthorized
• Replace battery in remote
control
• Operate remote control
within 30 mtrs. (unostruc-
ted)
• check remote control
programmed
Does not operate
with remote control,
red LED is not illumi-
nating.
• Remote battery dead • Replace battery in remote
control
6 Errors/Causes/Troubleshooting