Print-no. 504 474 4
01/2017
Installation, Operating and Maintenance
Instructions blueMatic EAV
8
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen www.winkhaus.de
Subject to technical changes
ECO-WATCH!
Notices on complying with regulations on environmental protection.
1.5 Important safety information
Safety information described in this section is to be diligently adhered to regarding the
installation and use of this security lock.
You must heed to the safety information provided without exceptions!
• Read the operating manual and keep it easily accessible for future reference. After
installing the door pass it on to the end customer.
• The manufacturer shall not be held liable for damage caused by use contrary to the
intended purpose of the product.
• For security reasons, the lock has been designed to be used in conjunction with ge-
nuine Winkhaus parts. Using other parts may adversely aect the given properties
of the security lock.
• It must be ensured that the door can be closed without any diculties with the key.
• Installation/Repair of electrical equipment requires expertise, thus such work
should only be carried out by a qualied electrician.
• Arbitrary modications, changes or makeshift repairs are not permitted due to
concerns for safety. You must only use genuine Winkhaus parts for replacements.
• The manufacturer shall only be held liable for security related properties of the lo-
cking system as stipulated within the bounds of statutory regulations, if the manu-
facturer himself or another instructed, authorized agent has carried out the main-
tenance and service work or made the changes.
• Winkhaus shall not be liable for any type of damage caused by inadequate repair or
changes made.
To Next Page
Loading...
