8
Accessories
7
Technical
specications
6
Errors
Troubleshooting
5
Maintenance
and care
4
Operation
Programming
3
Installation
2
Product
description
1
Important
information
General
information
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen www.winkhaus.de
Subject to technical changes
Print-no. 504 474 4
01/2017
Installation, Operating and Maintenance
Instructions blueMatic EAV
63
STV-KÜ-T1 SET FT INTEGRA-EAV FT 1M + KAB 3M
Plug-‘n‘-play solution for ngerprint ekey home integra
• Sash part STV-KÜ-T1 SET FT INTEGR-EAV FT 1M + KAB 3M
- Sash part with cable 1 m (6 x 0,25 mm²), cable ends with 8-pole plug for
control unit ekey home Integra
• Cable integra-EAV 3 m (3 x 0,25 mm²)
- 1st Cable end with plug for motor housing EAV
- 2nd Cable end with wire end sleeve
STV-KÜ-T1 SET FT ZK-EAV FT 4M + KA 3,5M
Plug-‘n‘-play solution for sash side access control systems (e.g. Fingerprint IDENCOM
BioKey INSIDE or ekey home SE micro)
• Sash part KÜ-T1-ZK-FL FLÜGELTEIL-EAV
- Sash part with cable 3.5 m (5 x 0.25 mm²), cable ends with 5-pole plug
• Y-KABEL ZK FLÜGEL-EAV 0.5 m (0,25 mm²)
- 1st Cable end with plug for motor housing EAV
- 2nd Cable end with plug for cable transition KÜ-T1-INSIDE-EAV
- 3rd Cable end with plug for sash side access control systems
STV-KÜ-T1 SET FT ZK-SO + EAV FT 1M + KABEL 3M
Plug-‘n‘-play solution for Fingerprint Sommer ENTRAsys FD
• Cable transition KÜ-T1-SOMMER-EAV FLÜGELTEIL with 5-pole plug
- Sash part with cable 1 m (6 x 0,25 mm²), cable ends with 5-pole plug for
receiver ENTRAsys FD
• Connection cable 3 m (3 x 0,25 mm²)
- 1. cable end with 3-pole plug for receiver ENTRAsys FD
- 2. cable end with plug for motor housing EAV