Notice: Grease must be compatible with non-ferrous metals and
plastics.
504474477
5
EN
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV Installation, Operating and
Maintenance Instructions
5 Maintenance and care
• Components of the door furniture relevant to security have to be checked
for tightness and wear at regular intervals. If required, the retaining screws
should be retightened and defective parts should be replaced.
• Check the locking mechanism and smooth operation of the security lock at
regular intervals (at least once every three months).
• At least once a year - more frequently if under a higher stress factor - all
moveable parts and all accessible sliding members of the locking system
need to be lubricated with a light grease (e.g. with the grease Divinol
Profilube SL (spraying grease); Divinol F14 EP or Shell Gadus S2 V100) and
checked for proper performance regarding mechanics and electronics.
• You should only use neutral cleaning agents or care products that do not
contain any abrasives in order to protect the anticorrosion coat of the door
furniture.
• Clean electronic parts only in a dry state.
T-POLFETT GR STÖßEL 5040239
To Next Page
Loading...
