Winkhaus blueMatic EAV - Access Control System Wireless Remote Control; Wireless Remote Control Set

504474447
3
EN
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV Installation, Operating and
Maintenance Instructions
Prerequisites for installation
• To ensure the reliable performance, the position of the wireless receiver is of
utmost importance for the received power.
• Do not install it at or nearby sources of possible interference (e.g. EDP/
high-performance power distributor).
• To prevent manipulation of the receiver we recommend installing the
receiver on the inner side of the door!
3.5 Access control system wireless remote control
Notice: If you use the flush-type box of the button, the box
will have to be 65 mm deep!
Notice: For safety reasons, you are not permitted to install it
in a flush-type box with a 230 V AC switch or socket outlet.
3.5.1 Wireless remote control set
Installation sequence
• The wireless receiver should preferably be installed in a 65 mm deep flush-
type box on the inside.
• If no switch or button is used next to the door, a flush-type box with a blind
cover can be provided for the wireless receiver.