WITTUR MIDI User Manual

Door Drive
MIDI / SUPRA
Operating instructions
Door Drive MIDI / SUPRA
Blatt/ sheet D823MGB.000
Datum/
date 01.03.2004
Stand/
version C-15.04.2009
Geprüft/
approved WAT/MZE
D823MGB 03.2004
EXCELLENCE IN COMPONENTS
No part of this publication may be reproduced or
translated, even in part, without prior written permis-
sion from WITTUR GmbH.
Änderungen vorbehalten!
We reserve the right to make alterations with respect
to the specifications and figures in this manual.
Subject to change without notice!
WITTUR GmbH
Sowitschstrasse 1 • A-3270 Scheibbs, Austria
Tel. +43 (0) 7482/42542-0
•
Fax +43 (0) 7482/42542-32
http://www.wittur.at
•
E-Mail: info@wittur.at
*D823MGB$111*
Valid since software version V1.4
ID Unique PM.2.000354GB

WITTUR MIDI Specifications

General

Brand	WITTUR
Model	MIDI
Category	DC Drives
Language	English

Summary

Commissioning the Door Drive

Power Supply

Safety Circuit

Driving Doors with Elevator Controller

Instructions for connecting and operating the drive via the elevator controller.

Driving Doors with Service Drive Buttons

Door Drive Adjustments

Closing Force Adjustment

Procedure for adjusting the door's closing force using a measuring device.

Adjustment of the Speed

Electrical Interfaces

Inputs

Passenger Protection Device Input and Supply

Outputs

DIP-Switches

Troubleshooting Door Operation

The Door Does Not Move

Diagnostic steps when the door fails to operate.

The Door Does Not Reopen

Troubleshooting issues related to the door's automatic reopen function.

Faults Causing Reset or Switch Off

Identifies faults leading to system resets or shutdowns.

Faults Decreasing Performance of Door

Addresses issues causing reduced door operational performance.

Reset of Coupler Width

Procedure to reset and re-learn coupler width parameters.

Reset of All Door Parameters

Instructions for resetting all door parameters to default settings.

Exchange of Electronic Box

Preparation for Learning of Door Parameter

Learning of Door Parameter

Wittur Programming Tool Interface Software Description

11.2 Connecting the Wittur Programming Tool to the WHD SUPRA-electronic

11.4 Door Adjustment with the Programming Tool

Guide to adjusting door parameters using the programming tool.

11.4.1 Login of the Programming Tool

11.4.2 'F2': Profile Data

11.4.3 'F1': Door Movement

Allows viewing/modifying door movement parameters like speed and acceleration.

11.4.4 'F4': Next (Door Movement)

11.4.5 'F2': Coupler Movement

11.4.8 'F4': Next (Main Menu)

Provides access to the error list and belt position information.

11.4.8.1 'F1 Error List'

Details possible faults and their error codes.

11.4.8.2 'F2 Belt Position'

Default Adjustment of WHD SUPRA Software

12.1 Default Adjustments for MIDI Drive

Provides default speed and acceleration settings for MIDI drive.

12.2 Default Adjustments for SUPRA Drive

Provides default speed and acceleration settings for SUPRA drive.

Drive Belt Maintenance

13.1 Belt Tension

13.2 Belt Exchange