Wizard 8500e - Page 2

38 pages

Save Page as PDF

To Next Page

To Previous Page

Wizard™ International, Inc., 4600 116th St. SW, PO Box 66, Mukilteo, WA 98275 888/855-3335 Fax: 425/551-4350 wizardint.com

NOTES:

Main Page

Default Chapter3
- Table of Contents3
Packing List7
- Check Contents7
- Equipment Required7
Setting up the 8500E Board8
Setting up the Stand or Wall Mount8
- Assembling the Wall Mount8
- Assembling the Stand8
Taking the Board out of the Box8
- Black Protective Covering Sheet10
- Unlocking the Shipping Blocks10
- Unlock the Gantry Wheels11
- Check Squareness12
  - Check the Alignment Arrows12
  - Check the Toothed Belt Lines13
Head Installation13
- Install the Head Onto the Gantry13
- Expose the Blade15
Installing the ST 500 Straight Line Trimmer16
- Slide on the Straight Line Trimmer16
Hooking up the Gantry and ST 500 Air Lines17
- Connecting the Board Cable17
Calibration and Alignment of the Straight Line Trimmer19
- Using the Straight Line Trimmer19
Install Hoods21
Hook up Computer21
- Hook up Computer Peripherals21
- Connect the ECU22
Turn on the System23
- Boot up the CPU23
Configuration Diskette24
Design Your First Mat24
- Edit New Mat24
Go to Cut Preview to Cut Your First Mat26
- Put Matboard on the CMC26
- Click Cut27
Align the Head When Motors Are Disengaged27
- Align the Head27
  - After the CMC Has Cut the Mat28
  - If the Cut Doesn't Look Right28
Changing the Blade28
- Plunge Count28
- Using the 5º Cartridge29
  - Changing the Blade29
- Using the 90° Cartridge30
  - Changing the Blade30
Aborting a Cut31
- Restarting after an Abort31
Design a Different Mat32
- Select a Different Template32
Where to Find more Information34
- More Information on the Straight Line Trimmer34
- Help - Context Sensitive Help34
Troubleshooting37
- Cuts Look Wavy37
- Blade Keeps Breaking37
Frequently Asked Questions37

Wizard 8500e - Page 2

Table of Contents

Related product manuals