Wizard Z1 - Table of Contents

Wizard CMC Model Z1
Getting Started Manual
Contents
Check Contents ..............................................................................................................4
Equipment Required .................................................................................................4
Where to Find More Information ...................................................................................4
Knowledge Base .......................................................................................................4
Website ......................................................................................................................4
CMC Components .....................................................................................................5
Head Labeled .............................................................................................................5
Cartridges ..................................................................................................................5
ECU .............................................................................................................................5
Air Regulator .............................................................................................................6
CMC Components Labeled ......................................................................................6
Setting up the CMC ........................................................................................................7
Setting up the Stand or Wall Mount ........................................................................7
Taking the CMC out of the Box ................................................................................7
Removing the Shipping Blocks ...............................................................................7
Check Squareness ....................................................................................................8
Head Installation .............................................................................................................8
Install the Head onto the Gantry ..............................................................................8
Hooking up the Gantry and Air Lines .........................................................................10
Connecting the Board Cable ..................................................................................10
Attaching the Air Lines ........................................................................................... 11
Attach the M12 Cable to the Control Panel ...........................................................12
Connect the Computer and ECU .................................................................................12
Hook up Computer and Peripherals ......................................................................12
Connect the ECU .....................................................................................................12
Control Panel ................................................................................................................14
Red Abort Button ....................................................................................................14
Mat SmartClamps™ Pressure Knob......................................................................14
SmartClamps™ Pressure Adjustment ..................................................................14
Green Cut Button ....................................................................................................14
Power Up Sequence .....................................................................................................14
Power Up the ECU ...................................................................................................14
Power Up the Computer .........................................................................................14
2
Wizard™ International, Inc., 4600 116th St. SW, Mukilteo, WA 98275 888/855-3335 Wizard™ International, Inc., 4600 116th St. SW, Mukilteo, WA 98275 888/855-3335 wizardcutters.comwizardcutters.com
20-36070-1 GettingStartedManualZ1-70FrameShop
04/03/24
Wizard™ CMC Model Z1 Hardware and Software Getting Started Guide