WMF 2000S - Submenu error list

11
User Manual WMF2000S
Operation
2.4 Shift button (optional)
Each beverage button may be doubly assigned.
Level 1always active.
 Press the shift button
Level 2activated.
 Press the desired beverage button
Level 1is active again after dispensing abeverage at
Level2.
2.5 Special buttons (optional)
Special buttons for beverage sizes Sand Lare optionally
available on the control panel. These are preselection
buttons which establish the desired amount of the
beverage before selection of the beverage.
M = amount of the beverage set, no preselection
S = approx. 25 % less than M
L = approx. 25 % more than M
2.6 Dispensing hot water
 Press the hot water button
Dispensing occurs.
If less water is required than the pre-set dispense amount,
dispensing can be stopped by pressing the hot water
button again.
2x
Shift button (active/inactive)
w Software w Settings
w Operating options
page 33