Software | Settings
Illumination (optional)
Set the colour values here of the LEDs for the desired
illumination colour
Setting examples red green blue
light sequence
(permanent colour change)
1 0 0
amber 25 30 0
blue 0 0 30
Milk (optional)
The empty milk message can be activated here.
Touch
Beverage lockout yes / no
Beverage lockout no
Beverages can be dispensed until the milk container is
actually empty.
Beverage lockout yes
Input is requested as to how many beverages can be
dispensed after the message has appeared. After this
number of beverages has been dispensed, beverages with
milk are blocked from further dispensing. Beverage lockout
is removed when the milk container is filled.
To Next Page
Loading...
