Software | Settings
Weigh grounds
Empty and replace grounds container
Touch
weigh grounds
The process dispenses ground coffee directly into the
grounds container and the grounds may then be weighed.
The grind quantity is dispensed three times.
Boiler temperature
Set desired boiler temperature
(Change brewing water temperature)
(default setting range 94–99°C)
Reset
The coffee machine software is restarted here.
Time and date
Clock time and date are set here.
Display language
The language used in the display is set here.
Display contrast
Contrast of the display is set here.
(Default value is 70)
Warm-up rinsing
Whether the coffee machine should rinse the brewing unit
with hot water after heating up is set here.
Recommended setting: active.
Foamer rinsing (optional)
Whether automatic foamer rinsing should occur after the
last beverage with milk components is dispensed.
yes / no
To Next Page
Loading...
