WMF 2000S - Rinsing Interval; Operating Options

33
User Manual WMF2000S
Software | Settings
Rinsing interval
The time elapsed between the last time abeverage with
milk was dispensed and afoamer rinsing.
Recommended setting: 2minutes.
Operating options
The following operating options are available.
• “Warm rinse” pad (active/inactive)
• Barista pad (active/inactive)
• 2nd level (shift button / no)
• ON/OFF button (direct/via PIN)
• Menu pad (immediate/delayed)
• Cancel beverage (yes / no)
• Error message (normal/symbol)
“Warm rinse” pad
Recommendation for self-service: inactive.
Barista pad
Recommendation for self-service: inactive.
2nd level
Recommendation for self-service: no.
ON/OFF button
Recommendation for self-service: via PIN.
If “via PIN” is set, then the PIN for the Cleaning level will
be queried before switching on or off.
Menu pad
Recommendation for self-service: delayed.
If “delayed” is set, the menu pad will only be shown if the
display is pressed twice.
Cancel beverage
Recommendation for self-service: no.
Error message
normal: all messages are shown on the display.
Symbol: messages that require immediate action are
shown on the display.
All other messages are displayed as symbol .
 Touch the symbol
All messages are displayed.
rinse interval
options
If customers serve themselves then
some functions can be switched
to inactive.
The pads will not be displayed on
the “Ready to operate” display.
w PIN rights, access control
page 36
w To the main menu
page 21
With illumination (optional):
messages that require immediate
action are accompanied by
flashing side illumination.