WMF 2000S - Page 55

55
User Manual WMF2000S
Messages and instructions
Your WMF2000S is provided with adiagnostics program.
Any errors that occur are shown on the display. The error
messages listed may also be caused by an interruption to
the mains electricity supply.
If there is acurrent error or amessage to the operator, the
pad is displayed.
 Touch
Error number is displayed.
Error
number
Error
description
Action instructions
6 Brewing unit lockup
current/brewing
unit stiff
 Switch off the coffee machine
 Clean the brewing unit
w Care w Brewing unit cleaning, page 45
26
36
Right grinder
blocked
Left grinder blocked
 Switch off the coffee machine
 Disconnect mains plug
 Remove bean hopper
 Turn grinder disk counter-clockwise using only
Multitool (square button) (see illustration)
 Replace hopper
 Switch on the coffee machine
w Care w Bean hopper cleaning, page 47
If this occurs frequently:
 Set grinding degree one stage coarser
w Other settings w Set grinding degree, page 38
88 Boiler:
over-temperature
 Switch off the coffee machine, allow to cool and
switch on again
If error not remedied
 Switch off the coffee machine
 Call WMFService
89 Boiler:
heat-up time error
 Switch off the coffee machine and on again