Initial setup
12
2.6 Filling the water tank
Caution!
Possible damage to your automatic coffee machine due to unsuitable liquids!
Liquids other than drinking water can damage your coffee machine or can result in clogging.
> Fill the water tank of your automatic coffee machine only with clean, cold drinking water.
> Never fi ll the water tank with hot water, mineral water or milk.
> Remove the water tank from the automatic coffee machine.
> Fill the water tank with cold tap water (maximum 2.2 litres).
The tank can be fi lled with the fi tted lid.
> Slide the water tank into the automatic coffee machine with the lid fi tted in position.
2.7 Insert the milk tube
The milk tube is already mounted on the All-In-One spout.
> Select the suitable milk nozzle:
- brown coloured milk nozzle for refrigerated milk (mounted during delivery)
- transparent milk nozzle for non-refrigerated milk.
> Insert the appropriate milk nozzle.
The milk nozzle is connected fi rmly to the tube and can be removed only by twisting and pulling.
> Remove the coffee grounds container.
> Push the All-In-One spout to the lower position.
To Next Page
Loading...
