Display messages
71
5.2 Messages for troubleshooting
The brewing unit is not inserted.
> Insert the brewing unit.
The brewing unit is not inserted.
> Check if the brewing unit is inserted correctly.
The brewing unit is inserted only with diffi culty or not at
all inserted:
> Remove the brewer.
> Open the brewing chamber with the multitool.
> Apply a thin layer of grease from the accessories to the
red gaskets (Chapter “4.4.2 Lubricating O-Ring of the
Brewer Unit” on page 67).
> Fill the water tank.
> Deaerate coffee machine: Dispense hot water until a
constant stream of water comes out.
Place brewer
Brewer
Brewer pos. switch
Water ow error
(Water tank empty)
Flow
To Next Page
Loading...
