EasyManua.ls Logo

WMF 900 - 3.3.3 Setting Coffee Strength

WMF 900
93 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
25
Hazard!
Possible danger of burns!
Hot steam is delivered and the drinking vessel can get very hot!
> Do not use the cup warmer without a drinking vessel and never without the drip tray grid with steam
board inserted in place.
> Use heat-resistant drinking vessels.
> Do not use the cup warmer without the associated saucer insert.
> Never leave children near the machine without supervision.
The
WMFAutomatic Coffee Machine is fi tted with the WMF Steam-Jet single, cup warmer for a single
cup.
> Place a drinking vessel with the opening facing downwards on to the Steam-Jet.
> Press the button with the cup warming symbol for longer than 2 seconds.
Hot steam slowly fl ows from below into the drinking vessel.
The fl ow of steam ends automatically when the button is
released, latest however after 8 seconds.
Your automatic coffee machine is now ready for operation.
3.3.3 Set the coffee strength for the next beverage
Prior to each coffee preparation, you can decide on the desired strength of your next coffee speciality.
> Set the desired coffee strength with
or
+
.
Following coffee strengths are available for selection:
cup preheater
ATTENTION! hot!
your selection pls
8:15 1.3.2011

Table of Contents

Related product manuals