WMF 900 - 3.3.7 Preparing Milk and Milk Foam

Operation
29
The display notifi es:
> Pour the ground coffee (adequate for a brewing cycle of about. 9 g) in the ground coffee insert (1b).
> Close the lid (1c).
> Select your beverage using the beverage buttons (one cup).
The procedure can be cancelled with
C
button.
3.3.7 Preparing milk and milk foam
Your WMFAutomatic Coffee Machine prepares hot milk and milk foam at the touch of a button.
Hot milk (All-in-one spout in the uppermost position)
> Place an appropriate drinking vessel under the All-In-One spout.
> Push the All-In-One spout to the upper most position.
> Briefl y press the milk button.
A mug of hot milk is prepared.
After the milk is dispensed, the All-In-One spout shall again be pushed slightly downwards.
Milk foam (All-In-One spout not in the uppermost position)
> Place an appropriate drinking vessel under the All-In-One spout.
> Push the All-In-One spout slightly downwards.
> Press and hold the milk button till the desired quantity of hot milk foam is prepared.
Insert coff. grounds
Select beverage
Cup volume: max. 15 g