Care
47
> Call the customer care programs (Chapter “4.2 Customer
Care programmes” on page 44).
> Browse until warm-up rinse.
> Place a suitable vessel under the All-In-One spout.
> Confi rm the warm-up rinse with
P
button.
4.2.3 WMF Connect & Clean milk system rinse
The automatic milk and coffee rinsing system unique in the world with an integrated automatic
switch-off feature assists you in preparing beverages with milk easily and hygienically, and thus, ensures
that you enjoy a perfect cup of coffee for a long time to come
.
Tip: To switch off the maching after the last Cappuccino, press the On-/Off-Switch; thereupon, the
machine automatically prompts you to attach the milk tube and to push the spout upwards. As soon as
the cleaning starts rest is taken care by your coffee machine: It automatically carries out milk and coffee
system rinsing and switches off on its own completely due to Zero-Energy-Function.
Hazard!
Possible scalding due to hot rinsing water!
If the milk hose is not fully screwed in it can work loose. Hot rinsing water can come out. After rinsing,
some hot water will remain in the milk hose.
> Always screw the milk hose fully in position.
> After rinsing, hold the open end of the milk hose over the drip tray so that the remaining hot water
can run out.
You are requested to rinse milk system 20 minutes after adding milk or milk foam.
Warm up rinsing
OK: P Browse: -/+
Warm-up rinse
To Next Page
Loading...
