Care
48
> Select the milk system rinse with
P
button.
The display notifi es the individual activities that must be
completed before the rinse.
> Push the All-In-One spout to the upper most position.
> Place a collecting vessel under the All-In-One spout.
> Wipe the outside of the milk hose with a clean damp
cloth.
> Place the milk hose with the milk nozzle on the hot
water spout (a).
> Turn the milk hose in clockwise direction to the point of
stop.
> Start the milk system rinsing with
P
button.
The inner area of the milk system is rinsed with hot water and the water is emptied via the All-In-One
spout. The All-In-One spout is cleaned via a pulse of steam.
milk system rinsing
OK: P browse: -/+
Milk system rinsing
a
45°
To Next Page
Loading...
