Display messages
74
> Switch off the Automatic Coffee Machine with the On-/
Off-switch (press for about 3 seconds).
> Switch on the Automatic Coffee Machine with the On/
Off switch.
On recurrence, the fault must be rectifi ed by the
WMF Service-Center.
The grinder is blocked by a foreign body.
> Switch off the machine and pull out the mains cable.
> Clean the bean hopper.
> Turn the grinder in the clockwise direction with the
multitool to be able to remove the foreign bodies.
> Switch on the machine.
> Start the grinder by pressing the beverage button.
> If the grinder is free again: Reset the grinding degree.
Grinding too fi ne.
> Set the grinding degree to be coarser
> Switch off the coffee machine.
> Allow the coffee machine to cool down.
> Again switch on the coffee machine.
On recurrence, the fault must be rectifi ed by the WMF
Service-Center.
Motor driver error
Motor driver
Grinder blocked
Grinder
Temp. sensor steam
Temperature sensor
Temp. sensor water
To Next Page
Loading...
