Woodward 721 - KW Droop Set(%)

721DSC for Marine Propulsion Application Manual 26004
Woodward
3
8
======================================================================
S.S3
∗ Dynamics 2 ∗
1 Idle Prop. Gain2 ∗1.0 (0.001, 50.0) _________
2 Rated Prop. Gain2 ∗1.0 (0.001, 50.0) _________
3 Integrator Rate2 ∗2.0 (0.1, 50.0) _________
4 Derivative Ratio2 ∗5.0 (1.0, 100.0) _________
5 Window Width2 ∗10.0 (1.0, 50.0) _________
6 Gain Ratio2 ∗1.0 (0.1, 10.0) _________
======================================================================
S.S4
∗ Speed Setting ∗
1 Start Speed ∗300.0 (200.0, 1000.0) _________
2 Idle Speed ∗350.0 (200.0, 1000.0) _________
3 Rated Speed ∗520.0 (300.0, 1000.0) _________
4 Raise Limit ∗572.0 (300.0, 1000.0) _________
5 Raise/Lower Rate ∗1.0 (0.1, 100.0) _________
6 Load Transfer Rate ∗1.0 (0.1, 100.0) _________
7 Spd Set at 4mA ∗350.0 (200.0, 1000.0) _________
8 Spd Set at BP,mA ∗8.0 (4.0, 20.0) _________
9 Spd Set at BP,RPM ∗350.0 (200.0, 1000.0) _________
10 Spd Set at 20mA ∗540.0 (200.0, 1000.0) _________
11 Tach at 4mA Output ∗0.0 (0.0, 1000.0) _________
12 Tach at 20mA Output ∗600.0 (0.0, 1000.0) _________
13 Spd Set at 4mA Output ∗0.0 (0.0, 1000.0) _________
14 Spd Set at 20mA Output ∗600.0 (0.0, 1000.0) _________
======================================================================
S.S5
∗ Kw Setting ∗
1 Rated KW ∗1280.0 (100.0, 10000.0) _________
2 20mA KW Load Input ∗1500.0 (100.0, 10000.0) _________
3 Kw Droop Set(%) ∗ 5.0 (0.0, 10.0) _________