Work Microwave VSCU - Page 46

Satellite Upconverter Manual WORK Microwave
46 / 49 V151207
conv2InterfaceID
.5.3.2.50.3
Reads the interface module firmware ID
conv2ReferenceID
.5.3.2.50.4
Reads the reference module firmware ID
conv2SynthesizerID
.5.3.2.50.5
Reads the synthesizer module firmware ID
conv2AmplifierID
.5.3.2.50.6
Reads the amplifier module firmware ID
conv2ReadOnlyCommunityName
.5.3.2.99.1
Sets and reads the SNMP read-only community name
conv2ReadWriteCommunityName
.5.3.2.99.2
Sets and reads the SNMP read-write community name
conv2TrapSinkServerTable
.5.3.2.99.3
Reads the table of SNMP trap servers
conv2FrontpanelTemperature
.5.3.3.1.1
Reads the front panel temperature
conv2ControllerTemperature
.5.3.3.1.2
Reads the controller board temperature
conv2RefboardTemperature
.5.3.3.1.3
Reads the reference board temperature
conv2SynthesizerTemperature
.5.3.3.1.4
Reads the synthesizer module temperature
conv2StatusSystem
.5.3.4.1
Reads the system status word
conv2StatusConverter
.5.3.4.2
Reads the converter status word
conv2ClearStoredAlarms
.5.3.5.1
Clears the stored alarms
conv2StoredAlarmsTable
.5.3.5.2
Reads the table of stored alarms
conv2ClearStoredEvents
.5.3.5.3
Clears the stored events
conv2StoredEventsTable
.5.3.5.4
Reads the table of stored events