3 - 38 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual
The WiFiConnect A.R.C. utility provides a quick method to configure a device for use on a private network,
primarily for use with Active Remote Configuration (A.R.C.).
WiFiConnect A.R.C. configures the default WiFi interface. The WEP key is set to PsionPsion123. The SSID is
set to Psion. The default interface becomes the active interface. Keep in mind that you must configure the
access point and the hand-held(s) to use the same settings.
Refer to the Active Remote Configuration (A.R.C.) Administrators Guide, PN 8000252, for details about
updating devices on your network. This manual is available at:
http://community.psion.com/knowledge/w/knowledgebase/1189.aspx
To Next Page
Loading...