Woson TANDA - Chapter 3 Receiving and Installation; 3.1 Package Inspection and Unpacking

Steam Sterilizer Operation Manual
TANDA Model REV-E Page of 43
10
Control Part
Part Name
Function
Temperature Sensor
(Internal)
Measure temperature inside the chamber
Temperature Sensor
(Heating Ring)
Measure temperature of the heating ring
Temperature Sensor
(Steam Generator)
To measure temperature of the steam generator
Pressure Sensor
To measure pressure of the chamber
PCB Control
Control system for all the process of sterilization
CAUTION: Manufacturer is not held responsible for any arbitrary disassembly,
amendment with the unit, by unauthorized person or unprofessional
technician.
2.4 Operation Risk
Please take attention on avoid operation risk during operation.
Scald risk
❖ Every time opening the door after sterilization cycle, please keep an appropriate distance,
because the chamber still has rudimental steam with high temperature.
❖ Every time open the door after sterilization cycle, please not touch the main door and
chamber, because of high temperature, and avoid to be scalded.
Pollution risk
Please clean the chamber after every time use to avoid rudimental contamination left inside
chamber.
2.5 Protection Device
Device Name
Function
Plastic or fabric glove
Useful during load and remove articles, avoid scald.